Bored cylindrical lock

A bored cylindrical lock is one in which two holes are bored, perpendicular to one another, into the door. A large hole is bored into the door face and a smaller crossbore hole is bored into the door edge, as opposed to a mortise lock prep cut into the edge of the door. Typically, the face hole is sized from 1.5 inches to 2.125 inches (3.8 to 5.4 cm) and is centered at 2.375 inches or 2.75 inches (6.0 cm or 7.0 cm) from the leading edge of the door, this distance is referred to as the backset.

Leave a Reply